May 22, 2020 15:35 by
admin
The final goal of AOPS is the complete degradation of the pollutants present in wastewater, aiming its final mineralization, yielding as final products: carbon dioxide, water and inorganic compounds
[More]
May 20, 2020 16:41 by
admin
The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them. The refractory compounds are thus converted into reaction intermediates and, ultimately, into water and CO2 by complete mineralization
[More]
May 19, 2020 18:06 by
admin
Electro-oxidation (EO), also known as anodic oxidation, is a technique used for wastewater treatment, mainly for industrial effluents, and is a type of advanced oxidation process (AOP
[More]
May 18, 2020 17:21 by
admin
Electro-oxidation (EO), also known as anodic oxidation, is a technique used for wastewater treatment, mainly for industrial effluents, and is a type of advanced oxidation process (AOP).[1] The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them. The refractory compounds are thus converted into reaction intermediates and, ultimately, into water and CO2 by complete mineralization
[More]
May 15, 2020 16:07 by
admin
Engineers derived a statistic analysis using The Electrolytic design for surface response analysis
using electrochemical sedimentation. Having considered current density, pH, and electrolysis design, the authors were capable of studying the effects of COD, turbidity, TS removal, and sludge settling with aluminum electrodes, Ferrous Electrodes, Titanium electrodes, etc.
[More]
May 14, 2020 18:48 by
admin
Electrocoagulation consists of pairs of metal sheets called electrodes, that are arranged in pairs of twoanodes and cathodes. Using the principles of electrochemistry, the cathode is oxidized (loses electrons), while the water is reduced (gains electrons), thereby making the wastewater better treated. When the cathode electrode makes contact with the wastewater, the metal is emitted into the apparatus.
[More]
May 13, 2020 16:36 by
admin
Electrolytic processes are custom designed and can remove all of the pollutants from the effluent environmental friendly and is not affected by the toxicity present in the waste stream.
[More]
May 11, 2020 18:28 by
admin
In the Electro coagulation-floatation apparatus, particulates would instead float to the top of the tank by means of formed hydrogen bubbles that are created from the anode. The floated particulates can be skimmed from the top of the tank. Waste Water Treatment Electro coagulation & Electro Oxidation design optimized Cl ions, temperature in degrees Celsius, pH, intensity of current, time of electrolysis. From the results, the authors observed that current intensity, COD (chemical oxygen demand), TOC (total organic carbon), and electrochemical oxidation were major parameters
[More]
May 9, 2020 19:13 by
admin
Electro coagulation-electro floatation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. It occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electro coagulation could reduce residue for waste production.
[More]
May 8, 2020 19:02 by
admin
Tiaano Appraisal Test Kit used to confirm the possibility of Treatment. The sample's reduction on BOD & COD is pre test and confirming to proceed for lab test.
[More]