June 11, 2020 14:53 by
admin
Mobile Wastewater Treatment Plant based on Electrocoagulation and Electro-Oxidation - Truck Mounted / Mini Van mounted Advanced Effluent Treatment Plant
[More]
June 10, 2020 18:07 by
admin
Electrochemical techniques use one of the cleanest reagents: “the electron.” Thus, since the main reactive used in the oxidation process is green, this becomes sustainable. Oxidation of the organic compounds could occur at the interface of the anode/aqueous solution or in solution via intermediates.
[More]
June 9, 2020 17:24 by
admin
ETP consider how effective the ECF reactor can be, one must consider the following inputs or variableswastewater type, pH, current density, type of metal electrodes (aluminum, steel, iron), number of electrodes, size of electrodes, and configuration of metals.
[More]
June 8, 2020 16:30 by
admin
Electrochemical techniques use one of the cleanest reagents: “the electron.” Thus, since the main reactive used in the oxidation process is green, this becomes sustainable. Oxidation of the organic compounds could occur at the interface of the anode/aqueous solution or in solution via intermediates.
[More]
June 6, 2020 19:12 by
admin
The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them
[More]
June 6, 2020 19:12 by
admin
The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them
[More]
June 4, 2020 19:36 by
admin
Traditional wastewater treatments involve the addition of chemicals or the use of microorganisms to treat polluted water. However, in both processes, there is always a residue known as sludge. The sludge management and final disposal could represent up to 50% of the total wastewater treatment plant cost
[More]
June 2, 2020 17:54 by
admin
Electrocoagulation-electroflotation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. Shammas et al. stated that coagulation occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electrocoagulation could reduce residue for waste production
[More]
May 28, 2020 17:48 by
admin
The most general layout comprises two electrodes, operating as anode and cathode, connected to a power source. When an energy input and sufficient supporting electrolyte are provided to the system, strong oxidizing species are formed, which interact with the contaminants and degrade them. The refractory compounds are thus converted into reaction intermediates and, ultimately, into water and CO2 by complete mineralization
[More]
May 27, 2020 18:44 by
admin
The e-ETP system concluded that current density, initial pH, electrolyte species, initial concentration of dye produce the effects upon the removal of C.I. Reactive Red 241 by electrocoagulation in regards to decolorization. From the results, it was determined that dye removal was a first order reaction, where the COD removal could be determined using the artificial neutral network (ANN) and response surface method.
[More]