Water Sanitizer

NaOCl, HOCl

TIAANO's ELECTROLYTIC SEWAGE TREATMENT PLANT(e-STP)

clock May 12, 2020 18:22 by author admin
Electro-coagulation process removes ions, FOG, Silica, Organic particulate matter and helps in reduction of COD, BOD and suspended solids. Electro Coagulation Reactor treating of both black water (sewage) and grey water (domestic wastewater). [More]


EFFLUENT TREATMENT PLANT & SEWAGE TREATMENT PLANT

clock May 11, 2020 18:28 by author admin
In the Electro coagulation-floatation apparatus, particulates would instead float to the top of the tank by means of formed hydrogen bubbles that are created from the anode. The floated particulates can be skimmed from the top of the tank. Waste Water Treatment Electro coagulation & Electro Oxidation design optimized Cl ions, temperature in degrees Celsius, pH, intensity of current, time of electrolysis. From the results, the authors observed that current intensity, COD (chemical oxygen demand), TOC (total organic carbon), and electrochemical oxidation were major parameters [More]


Tiaano ETP/STP Waste Water Treatment Plant

clock May 9, 2020 19:13 by author admin
Electro coagulation-electro floatation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. It occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electro coagulation could reduce residue for waste production. [More]


Tiaano Appraisal Kit for Effluent Treatment Plant

clock May 8, 2020 19:02 by author admin
Tiaano Appraisal Test Kit used to confirm the possibility of Treatment. The sample's reduction on BOD & COD is pre test and confirming to proceed for lab test. [More]


Tiaano's e-STP System with Electrolytic Concept

clock May 5, 2020 19:14 by author admin
The use of a Central Composite Design for the optimization. Arslen-Alton et al. concluded that the central composite design was used to optimize CI Acid Blue 193 treatment by electrocoagulation. The central composite design is capable of achieving maximum color, COD, TOC, by manipulating the COD, pH, electrical current density, and treatment time by means of a response surface quadratic model [9]. Cora and Hung were able to remove metallic ions between 90 and 99% after 30 minutes of treatment using an electrocoagulation/electrofiltration with a pH of 9.5 and cadmium chloride for the metallic ions [10]. [More]


TIAANO's ELECTROLYTIC SEWAGE TREATMENT PLANT(e-STP)

clock May 4, 2020 19:59 by author admin
Electrocoagulation-flotation is an alternative method to classic chemical coagulation for many reasons. ECF is capable of reducing the need for chemicals due to the fact that the electrodes provide the coagulant. However, many individuals still use chemical coagulants to attempt to enhance treatment. Traditionally, chemical coagulation involves the use of alum (aluminum sulfate), ferric chloride (FeCl3), or ferrous sulfate (Fe2SO4) which can be very expensive depending on the volume of water treated. When applying the coagulant, the coagulant performs a similar function as the electrodes, neutralizing the charge of the particulates, thereby allow them to agglomerate and settle at the bottom of the tank. In addition, electrocoagulation-flotation is capable of reducing waste production from wastewater treatment and also reduces the time necessary for treatment. [More]


ELECTROLYTIC EFFLUENT TREATMENT PLANT (e-ETP)

clock April 28, 2020 16:20 by author admin
Electrocoagulation-electroflotation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. Shammas et al. stated that coagulation occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electrocoagulation could reduce residue for waste production [More]


ELECTROLYTIC EFFLUENT TREATMENT PLANT (e-ETP)

clock April 18, 2020 19:57 by author admin
The Electro coagulation model comprised with Ericohrome Black T and oil/water emulsion where the primary mechanism operated were aluminum hydroxide precipitate and charge neutralization of developed model for wastewater pollution considering hydrodynamic conditions using chemical reaction of reagents and pollutants, where a multivariable modeling of anodes was described. The model combined a macroscopic/maximum gradient approach for all processes with pseudo equilibrium. [More]


Hotels Waste Water Treatment by Electrolytic Method

clock April 14, 2020 17:57 by author admin
Isotherm kinetics for arsenic removal from aqueous solutions by means of electrocoagulation through response surface methodology. It concluded that COD and Colour removal of 81.6% and 98.4%, respectively, were capable of treating bio-digester effluent within an electrocoagulator. [More]


ELECTRO COAGULATION METHOD FOR WASTE WATER TREATMENT

clock April 10, 2020 11:30 by author admin
Electro Coagulation Reactor (ECR) consists of electrodes, which is arranged in anode & cathode. Using the principles of electrochemistry, the cathode is oxidized (loses electrons), while the water is reduced (gains electrons), thereby making the wastewater better treated. [More]


Category list

Sign In